Lycan Foam is our highly concentrated snow foam, pH neutral upon application, and compatible with all paint types, waxes, sealants, and ceramic coatings. Unlike thick foams that merely dwell, Lycan Foam, developed with humectants, quickly wets surfaces to allow detergents to effectively clean. It’s formulated to break down dirt and grime, leaving surfaces primed for contact cleaning. To optimize its use, calculate your setup’s Panel Impact Ratio (PIR) beforehand.
How to Use:
1. For heavily soiled vehicles, use a PIR of 5%; for lighter cleaning, use a PIR of 1%.
2. Apply foam from top to bottom.
3. Let it work for up to 5 minutes.
4. Rinse.
5. Clean the vehicle using Lycan Shampoo.
Calculating PIR:
1. Fill your snow foam lance or feed reservoir with water.
2. Spray your pressure washer and filled lance into a bucket until empty.
3. Measure the total water collected in liters.
4. Divide by 20 for heavily soiled vehicles or 100 for lightly soiled ones.
5. That’s the amount of Lycan Foam needed in liters; fill your lance accordingly and top up with water.
Warning – Do not allow the product to dry on the vehicle surface, Extra care should be taken when used in direct sunlight
What others are saying
There are no contributions yet.